Scaleauto F1 90-97 Rules – 2023
Eligible cars.
Any scaleauto F1 90-97 car.
Rules
⦁ No unpainted bodies (for cars built from kits).
⦁ Bodies and chassis must remain standard and not modified.
⦁ No lightweight interiors.
⦁ All chassis’ must be the standard black.
Mounting screws (body or motor pod) may be loosened.
⦁ No magnets may be fitted.
⦁ Motor pods : standard as supplied/manufactured SC6523c.
⦁ Motor must be the standard SC0025b motor as fitted to prebuilt models.
Maybe upgraded to SC0025c as fitted to new models.
⦁ Gear ratios:- ONLY the standard ratio as per the ‘ready to run’ models of :-
26/10. May be changed to slot.it brass equvalent.
⦁ Only original solid axles front and rear are permitted.
⦁ Front axle ride height and movement may be adjusted by the use of grub screws.
Front Wheels – Standard scaleauto 14×10
Rear Wheels – Standard scaleauto 14×13
⦁ Front and rear wheels must have inserts.
⦁ Front tyres:- original fit Scalauto SC4762 front tyres, as supplied.
Minimum diameter when fitted to the hub 17mm .
These may not be sanded down/trimmed in any way, or coated
with varnish, super-glue, or any other coating.
⦁ Rear tyres :- original fit Scalauto SC4763 rear tyres.
Minimum tyre diameter when fitted to the hub 18mm.
NOTE:- The use of any front and/or rear F1 tyre (other than those specified above)
from any manufacturer is not permitted.
⦁ Maximum axle width :- Outer edge of rim or tyre to the opposing outer rim/tyre edge..
Front – 69mm, Rear – 69mm.
⦁ Minimum ride height – Front 0.5mm, Rear, 1mm under the motor.
⦁ Guide, braid and screws are free choice.
⦁ Weight may be added but must not be visible.
⦁ Anything not covered by these Rules is not permitted. (Check with the Scrutineer.)